AiM SmartyCam GP HD ver 1.00 - Manual (Page 5)

Cam HD’s internal sensor can be
shown in overlay.
If a GPS receiver is connected,
SmartyCam HD can show also the
position on the track, speed and lap
times.
Is it possible to connect more
SmartyCam hD cameras on the
same CAN network?
Yes, every SmartyCam HD has its
own configuration and automati-
cally retrieves the data it needs
from the network, without interfe-
ring with the others.
Is it possible to synchronize video
and data recorded by the loggers?
Yes. Using the new RaceStudio3,
ready in the second half of 2013, it
will be possible to automatically
synchronize video and data, and
show them on the same dedicated
view.
RaceStudio2 enables you to ma-
nually synchronize data and video.
Which video format does
SmartyCam hD generate?
SmartyCam HD generates .mov files
with H264 compression.
You can choose from three different
compression levels (low, medium,
high) and two different frame rates
(25 and 30 frames per second).
Does SmartyCam hD start and
stop automatically?
Yes. SmartyCam HD offers different
logics for starting and stopping
video recording.
Acceleration or speed can be used
for triggering when to start and to
stop the activities.
You can choose your preference
using the on-board Menu or
through SmartyManager software.
05
GeTTING STArTeD SMArTYCAM hD
SMARTYCAM HD MANUALE ENG _Layout 1 24/07/13 20.40 Pagina 6