AiM GET Power ECU for SoloDL - Manual (Page 6)

5
The software shows SoloDL configuration page: press “Configuration Manager” and select the
configuration you want to use or press “New” to create a proper one. In this second case “New
configuration” panel appears: select ECU Manufacturer “GET” and ECU Model “GP1_EVO” or "A4".
While Get Power ECU communicates using protocol (ECU Model) "GPI_EVO" only, there are in fact
two communication protocols (ECU Model) available for GET GP1 EVO ECU only. At first it used
"GP1_EVO" protocol but, starting from firmware version GP86 of February the 4th 2013 or from the
version identified with code A4BEQJ, the protocol (ECU model) to be selected is "A4". Here below the
more recent version is shown.
Confirm pressing “OK” in both panels and transmit the configuration to SoloDL pressing “Transmit” as
here below.