AiM Microtec M222 for SoloDL - Manual (Page 2)

1
This user guide explains how to connect Microtec M222 ECU to AiM SoloDL. It is an aftermarket
product installed on Honda bikes only. Please refer to Microtec website “www.microtec.cc” to know
supported bike models.
1
Installation notes
To install SoloDL on your bike you can use a bar pad. AiM provides the two optional bar pads shown
below:
• bar pad for handle bar with cross brace – part number: DNKTKPMSOL1 image on the left;
• bar pad for handle bar without cross brace – part number: DNKTKPMSOL0 image on the right.