AirLive AP60 - Manual (Page 72)

7. Device Status Menu
AirLive AP60 User’s Manual 66
7.2 Device Information
This page shows the general information about AP60 such as Uptime, Firmware version,
Wireless Interface…etc. Below are some additional explanations on some status
information of this page:
Device Name: You can change AP60 device name in the column.
Uptime: This displays the time since system last boot up. This is a good indication
for how long the system has been alive.
Firmware version: This place will display the current firmware version of your AP60.
In general, AirLive will refer to its firmware as exx (such as e10) version on the release
note
Wireless: This page displays the current settings and status of the radio. It includes
the BSSID and connection status. The BSSID is also the wireless MAC address that
is needed for the WDS entry.
LAN Configuration: This page displays the status of the LAN port such as MAC
address, DHCP status.
Internet Configuration: Internet configuration tells you the current status of WAN
port such as IP address, WAN Type and connection status.