1 control by ip address, 2 control by mac address, Control by ip address – AirLive AP60 User Manual
Page 79: Control by mac address
8. Bandwidth Control
79
AirLive AP60 User’s Manual
8.2.1 Control by IP Address
You can set the maximum bandwidth of a PC or a subscriber by using the IP Control.
Please follow the procedure below to setup IP Bandwidth Control:
1. Configure Address Type to IP.
2. Enter the Local IP Address Ranges which will be limited.
3. Select the control mode by pull-down bar.
4. Enter the Uplink/Download Bandwidth.
5. Click Apply Changes to save settings.
6. Reboot your AP.
8.2.2 Control by MAC Address
You can set the maximum bandwidth of a PC or a subscriber by using the MAC Control.
Please follow the procedure below to setup MAC Bandwidth Control:
1. Configure Address Type to MAC.
2. Enter the Local IP Address Ranges which will be limited.
3. Select the control mode by pull-down bar.