AirLive BC-5010 - Manual (Page 52)

9. Event
AirLive BC-5010 User’s Manual 46
NOTE Due to the network environment, the camera may not upload number of images
that you set.
5. HTTP Event Server: Select Enable to enable the Http server for the camera.
- URL: Enter the IP address of the HTTP server.
- HTTP Port: Set port number of HTTP server.
- User Name: Enter the user name to login into the HTTP server.
- Password: Enter the password to login into the HTTP server.
NOTE Due to the network environment, the camera may not upload number of images
that you set.
9.2 Event Schedule
This menu is used to specify the schedule of Event or Schedule Trigger and activate the
some actions provided by this device. Where the Schedule Trigger will be activated by
user-define interval without event happened.
Follow the steps below to set up the Event Schedule for the camera:
5.
Select Enable and enter the Event Name.
tection, Digital Input 1, or Digital Input 2.
7.
S
- AIL: The camera will send the attachment to the assigned receiver when
- The camera will transfer the attachment to the network storage
- P: The camera will send instant message to the TCP server when
- TP: The camera will send instant message to the HTTP server when
- note
an external
6.
Select the Trigger by: Motion De
elect the Action when triggered:
- Enable FTP: The camera will upload the attachment to FTP when triggered.
Enable EM
triggered.
Enable Samba:
when triggered.
Enable TC
triggered.
Enable HT
triggered.
GO Preset: The camera will move to the preset position when triggered. Please
that the function is available only when a RS-485 device, such as
camera stand with rotation function, is connected to the camera.