AirLive BC-5010 - Manual (Page 61)

11. System
AirLive BC-5010 User’s Manual 55
11.5 Maintenance
1. Factory Reset: Click Reset to restore all factory default settings for the camera.
2. System Rebooted: Click Reboot to restart the camera just like turning the device off
and on. The camera configuration will be retained after rebooting.
3. Configuration Backup/Restore: You can save your camera configuration as a backup
file on your computer. Whenever you want to resume the original settings, you can
restore them by retrieving the backup file.
- Backup: Click the button to save the current configuration of the camera.
- Restore: Click Browse to locate the backup file on your PC and then click Restore.
You can also click Restore from SD CARD Device if the backup file is saved in the
inserted SD card.
Warning!!!
The download firmware procedure cannot be interrupted. If the power and/or network
connection are broken during the download procedure, it might possibly cause serious
damage to the device.
Strongly suggest that DO NOT upgrade firmware via Wireless LAN due to high error rate
possibly and don't allow any other clients to access this unit during updating procedure.
Be aware that you should not turn off the power during updating the firmware and wait for
finish message.
Furthermore, the firmware upgrade procedure always is risk and do not try to upgrade
new firmware if it’s not necessary.