Brady PAM 3000 - Manual (Page 22)

22 Printer-Applicator-System PAM 3000
Pad Unit
Versions
The pad unit consists of the pad holder, the pad and the blow tube. The format of the pad
holder and the pad depends on the label format.
So there are two different versions of the pad holder, the small format (type 1200) and the
large format (type 1100).
The small format is recommended for use of small labels with a height up to 25 mm.
The pad is specific designed for each label format which is used.
When applying large labels it is necessary to mount a blow tube additionally.
Fig. 5d Front view pad holder (1) and pad (2)
Fig. 5e Side view pad holder (1) and pad (2)
Small format
Small format
Large format
Large format
1
2 1
2
1
2
1
2