AirLive GW-300R - Manual (Page 66)

3. Making Configuration
AirLive GW-300R User’s Manual 62
Example:
Configuration on NAT Router
Destination SubnetMask Gateway Hop Enabled
ram to 192.168.0.2, it would use
fter routing table setting is configured, click the save button.
192.168.3.0 255.255.255.0 192.168.1.216 1 ˇ
192.168.0.0 255.255.255.0 192.168.1.103 1 ˇ
So if, for example, the client3 wanted to send an IP data g
the above table to determine that it had to go via 192.168.1.103 (a gateway),
And if it sends Packets to 192.168.3.11 will go via 192.168.1.216
Each rule can be enabled or disabled individually.
A