Faq and troubleshooting, Hooting, Faq and troubles – AirLive GW-300R User Manual
Page 88
Advertising
FAQ and Troubleshooting
AirLive GW-300R User’s Manual
84
hooting
What can I do when I have some trouble at the first time?
1. Why can I not configure the router even if the cable is plugged in the ports of Router and
FAQ and Troubles
the led is also light?
A: First, make sure that which port is plugged. If the cable is in the Wan port, please
change to plug in Lan port 1 or Lan port 4:
Then, please check if the Pc gets ip address from Router. Use command mode as below:
Advertising