AirLive OD-325HD - Manual (Page 16)

3. Preparation
AirLive OD-325HD User’s Manual 12
Installing the device with an UPnP router on your network is an easy 3–step procedure:
(1) Enable UPnP option of your NAT router
(2) Enable UPnP NAT traversal option of the Network Camera
(3) Access your Network Camera by DIPS
(1)Enable UPnP option of your NAT router
To use UPnP IGD function (NAT traversal), you need to make sure the UPnP function is
enabled in your router. Most new home routers should support this function. Some of
routers are default enable and others are not. Please check user’s manual of your NAT
router for detail.
(2) Enable UPnP NAT traversal option of the Network Camera
Refer to Setting
Î Network Î UPnP page for detail NAT traversal setting.
(3) Access your Network Camera by DIPS
Refer to Setting
Î System Î System page for detail DIPS information.
3.4 Access the device from the Internet Explorer for the first time
1. Start the web browser on the computer and type the IP address of the Network Camera
you want to monitor as below:
The Login Window of the Camera is prompted: