AirLive POE-100CAM User Manual
Page 31
7.1.2 Alarm sending
Set to forward the image and audio file to the specified FTP server linked with the alarm detection by the
external sensor input or by the built-in motion detection function. Select On to send the image and audio file to
FTP server linked with the alarm detection.
z
Remote path：Type the path to the destination in FTP server up to 64 characters.
z
Image file name：Type the file name you want to assign to the images when sending to the FTP server.
You can use up to 10 alphanumeric characters, - (hyphen) and _ (underscore) for naming.
z
Suffix：Select a suffix to add to the file name:
Date & time: The date & time suffix is added to the Image file name. The date/time suffix consists of lower
two-digits of year (2 digits), month (2 digits), date (2 digits), hour (2 digits), minute (2 digits), second (2
digits), and consecutive number (2 digits), thus 14-digit number is added to the file name.
Sequence number: A consecutive number of 10 digits between 0000000001 and 4294967295 and two
fixed digits 00 is added to the Image file name.
z
Motion Detection：Click it on for using Motion Detection function as a sensor. You can set the motion
detection function page.
Note：
• Motion Detection works only when the Video mode is set to MPEG4 and the Cropping is set to Off.
z
Alarm Buffer：Select Use alarm buffer when you forward the image/ audio of before and after the alarm
detection (pre-alarm, post-alarm). If you do not select it, only the image of the moment of the alarm
detection is forwarded. Click Alarm buffer to display the Alarm buffer setting menu. For details, see
“Setting the Alarm Buffer — Alarm buffer setting Menu on page.
z
Effective period：Set the period when the periodical sending is effective.
z
Always：The periodical sending is always effective.
26 AirLive POE-100CAM User’s Manual