AirLive POE-100CAM User Manual
Page 38
7.3.2 Alarm sending
Set to send the mail with connection to the alarm detection by the external sensor input or by the built-in motion
detection function.
z
Alarm sending：Select On to set to send mail with connection to the alarm detection.
z
Motion Detection：Click it on for using Motion Detection function as a sensor. You can set the motion
detection function page.
Note：
• Motion Detection works only when the Video mode is set to MPEG4 and the Cropping is set to Off.
z
Alarm Buffer：Select Use alarm buffer when you forward the image/ audio of before and after the alarm
detection (pre-alarm, post-alarm). If you do not select it, only the image of the moment of the alarm
detection is forwarded. Click Alarm buffer to display the Alarm buffer setting menu. For details, see
“Setting the Alarm Buffer — Alarm buffer setting Menu on page.
z
Effective period：Set the period when the periodical sending is effective.
Always：The periodical sending is always effective.
Schedule：You can specify the period when the periodical sending is effective in the schedule setting in
the other section. Click Schedule and the setting menu for the effective period is displayed.
AirLive POE-100CAM User’s Manual 33