AirLive POE-FSH1008AT - Manual (Page 14)

2. Installation of the Switch
AirLive POE-FSH1008AT User’s Manual
9
Attaching the Switch to a 19-inch rack
2.5 Desktop Installation
The POE-FSH1008AT has four rubber pads attached on each corner of its underside.
These pads serve as cushioning against vibration and prevent the switch from sliding off its
position. They also allow adequate ventilation space when you place the switch on top of
another device.
Desktop installation
 The location you choose to install your switch and the way you configure your network
may greatly affect its performance. Please see the previous section for “installation site”
preparation.
 Do not place more than 1.5kg (6.6lbs) of weight on the top of the switch.
 Leave at least 10cm of space around the switch to allow proper heating dissipation.