AirLive POE-FSH1008AT - Manual (Page 52)

4. Web Management
AirLive POE-FSH1008AT User’s Manual
47
 Port No: The port ID. It cannot be changed. Aggregations mean any configured trunk
group.
 Root Path Cost: This parameter is used by the STP to determine the best path
between devices. Therefore, lower values should be assigned to ports attached to
faster media, and higher values assigned to ports with slower media. Set the RSTP
path cost on the port. Number between 0 - 200000000. 0 means auto generated path
cost.
 Priority: Show the value of the Port Priority. Ex: 0x80 is 128.
 State: Show the current port state includes Designated port, Root port or Blocked
port.
 Status: Show the current port status includes Forwarding, Disable, Blocking...etc.
 Designated Bridge:
The field shows the MAC Address of the designated bridge
(switch).
 Designated Port : The field shows the designated port number.