AirLive POE-FSH808AT - Manual (Page 28)

4. Web Management
AirLive POE-FSH808AT User’s Manual 23

Tx/Rx-Ability: Enable or Disable. The default value is "Enable". Being set as "Enable",
the port can Transmit and Receive packet without any problem. After changed to
"Disable", the selected ports cannot access the network anymore.
 Auto-Negotiation: Enable and Disable. Being set as ‘Enable’, the Speed, Duplex
mode, Pause, Backpressure, TX Capability and Address Learning are negotiated
automatically. When you set it as ‘
Disable’, you have to assign those items manually.
 Speed: When the Auto-Negotiation column is set as Disable, users have to set the
connection speed to the ports ticked.
 Duplex: When the Auto-Negotiation column is set as Disable, users have to set the
connection mode in Half/Full to the ports ticked.
 Pause: Flow Control for connection at speed of 10/100Mbps in Full-duplex mode.
 Backpressure: Flow Control for connection at speed of 10/100Mbps in Half-duplex
mode.
 Addr. Learning: When the Auto-Negotiation column is set as Disable, users have to set
this column as Enable or Disable.
 Select Port No.: Tick the check boxes beside the port numbers being set.