AirLive POE-FSH808AT - Manual (Page 36)

4. Web Management
AirLive POE-FSH808AT User’s Manual 31
VLAN Member in Tag Based Mode
In Tag Based Mode you need to define and configure your VLAN groups. Since you want
the handover to other switches take place smoothly, the VLAN IDs (Numbers) need to be
like on the rest of your network. On other switches you may have the chance to configure
names. These are just for your reference. Only the numbers are important!

VLAN ID (VID):
Since you want the handover to other switches take place smoothly, the VLAN IDs
(Numbers) need to be like on the rest of your network.
(On other switches you may have the chance to configure names. These are just for your
reference. Only the numbers are important!)
 Add: Enter a VID, select the VLAN member for this entry and then press this button to
add a VLAN entry to the table. The available range of VID is from 1-4094.
 Delete: Select a VID in the table and then press this button to remove a VID entry from
the table. After deleted, the VLAN and its member port setting is gone.
 Update: Modify the existing VLAN setting. Select the VID, the below settings display,
you can change the settings and then press the Update button to update the settings.