Outgoing, Entering the outgoing window – AirLive RS-1000 User Manual
Page 103
９８
Outgoing
This section describes steps to create policies for packets and services from the LAN network
to the WAN network.
Entering the Outgoing window
Step 1.
Click Policy on the left hand side menu bar,
Step 2.
Click Outgoing under it. A window will appear with a table displaying currently
defined Outgoing policies.
Figure7-1 Create an Outgoing Policy
The fields in the Outgoing window are:
"
Source: source network addresses that are specified in the LAN section of
Address menu, or all the LAN network addresses.
"
Destination: destination network addresses that are specified in the WAN
section of the Address menu, or all of the WAN network addresses.
"
Service: specify services provided by WAN network servers.
"
Action: control actions to permit or reject/deny packets from LAN networks to
WANnetwork travelling through the Security Bandwidth Manager.
"
Option: specify the monitoring functions on packets from LAN networks to
WANnetworks travelling through the Security Bandwidth Manager.
"
Configure: modify settings.
"
Move: this sets the priority of the policies, number 1 being the highest priority.
!!