AirLive RS-1000 - Manual (Page 39)

３４
DHCP
In the section, the Administrator can configure DHCP (Dynamic Host Configuration Protocol)
settings for the LAN (LAN) network.
Entering the DHCP window
Click System on the left hand side menu bar, then click DHCP below it. The DHCP window
appears in which current DHCP settings are shown on the screen.
Figure1-29 Dynamic IP address
Dynamic IP Address functions
" Subnet : LAN network’s subnet
" NetMask : LAN network’s netmask
" Gateway: LAN network’s gateway IP address
" Broadcast: LAN network’s broadcast IP address
!!