AirLive WFP-101U v2 - Manual (Page 76)

6.4.3 TCP/IP
You can configure the MFP Server to automatically get an IP address from
DHCP server or manually specify a static IP.
If you need the MFP server to automatically get an IP address from a DHCP
server, select “Enable Obtain TCP/IP Settings Automatically (Use DHCP/
BOOTP)”. You also can select “Disable Use the following TCP/IP Settings” to
manually assign an “IP Address”, “Subnet Mask” and “Gateway” for the MFP
server.
AirLive WFP-101U v2 User’s Manual 68