AirLive WLA-9000AP PCBA - Manual (Page 7)

1. Introduction
„ Easy configuration and monitoring through the use of a Web-browser based GUI with
predefined operation mode. SNMP commands from a remote SNMP management
station, and UPnP for users to automatically discover the device.
„ Setup Wizard for easy configuration/installation.
„ Configuration file download and restore.
„ Firmware upgradeable for flexibility to add extra features.
1.3 Operational Modes
There are currently 4 predefined operational modes. Extra operational mode will be added
according to the evolution of firmware.
They are:
1. Dual WDS bridge mode
2. Dual AP mode
3. AP + Client mode
4. AP + Bridge mode
1.3.1 Dual WDS bridge mode
When configured to operate in the Wireless Distribution System (WDS) Mode, the
WLA-9000AP provides bridging functions between LANs physically separated. When
configured in the Dual WDS Bridge mode, a WLA-9000AP allows solving discontinuous link
due to geographical obstacles, shown as below and extension of distance between two
WDS bridge nodes separated by a building.
WLA-9000AP acts in Dual WDS Mode application as repeater of backbone
1.3.2 Dual AP Mode
In Dual AP mode, both wireless interface of WLA-9000AP are set as AP and provide
hotspot service on each interface.
AirLive WLA-9000AP User’s Manual 2