AirLive WLA-9000AP PCBA - Manual (Page 8)

1. Introduction
WLA-9000AP acts in Dual AP Mode application to serve wider coverage
This Application provides winder coverage that difficult to be reached with a unique omni
antenna by using another adequate antenna such as sector antenna. It’s particularly
suitable for WISP to provide stable and high performance link.
1.3.3 AP + Client Mode
In AP + Client operational Mode, WLA-9000AP can be used as the repeater of backbone, it
provide the possibility to “chain-up” continuously from one point to another despite of long
distance crossing the wide geography.
Multiple WLA-9000AP act in continuous AP-Client Mode application to chain backbone
1.3.4 AP + WDS bridge Mode
Under this operational mode, WDS acts as bridge to pass through data from another
remote node as point-to-point data transmission. The other side acts as AP and provides
coverage as point-to-multi point service. One device satisfies multiple applications
maintaining the performance.
WLA-9000AP acts in AP+WDS Mode application as extension of backbone in long distance.
3
AirLive WLA-9000AP User’s Manual