AirLive WN-300R - Manual (Page 46)

Figure 25: TCP/IP Properties (Windows Vista)
5. Ensure your TCP/IP settings are correct.
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the
default Windows setting. To work correctly, you need a DHCP server on your LAN.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured for a fixed (specified) IP address, no changes are
required.
(The Administrator should configure the Wireless Access Point with a fixed IP address
from the same address range used on the PCs.)
AirLive WN-300R User’s Manual 40