AirLive WN-300R - Manual (Page 61)

button to find out more information.
Internet IP Address This IP Address is allocated by the ISP (Internet Service
Provider). If using a dynamic IP address, and no connection
currently exists, this information is unavailable.
WAN MAC Address It displays the MAC address for the WAN.
Connection Details Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the
type of connection, a "log" may also be available.
LAN
IP Address The IP Address of the Wireless Router.
Network Mask The Network Mask (Subnet Mask) for the IP Address
above.
DHCP Server This shows the status of the DHCP Server function. The
value will be "Enabled" or "Disabled".
MAC Address This shows the MAC Address for the Wireless Router, as
seen on the LAN interface.
Wireless
Region The current region, as set on the Wireless screen.
Channel This shows the Channel currently used, as set on the
Wireless screen.
Wireless AP This indicates whether or not the Wireless Access Point
feature is enabled.
SSID 1/2 It displays the name of the SSID 1/2.
Broadcast Name This indicates whether or not the SSID is Broadcast. This
setting is on the Wireless screen.
MAC Address The MAC (physical) address of the Wireless Access Point.
System
Device Name The current name of the Router. This name is also the
"hostname" for users with an "@Home" type connection.
Firmware Version The version of the current firmware installed.
Current Time It displays the current time of the system.
Buttons
Connection Details Click this button to open a sub-window and view a detailed
description of the current connection.
Refresh Screen Update the data displayed on screen.
5.3 Connection Status - PPPoE
If using PPPoE (PPP over Ethernet), a screen like the following example will be dis-
played when the "Connection Details" button is clicked.
AirLive WN-300R User’s Manual 55