Allen&Heath iDR10 - Manual (Page 8)

8 iDR10 User Guide
Installation
Free standing
The iDR10 can be operated as a freestanding unit for shelf or floor operation. Ensure adequate air
flow around the unit. It must not be covered in any way. Always stand the unit on a firm flat surface
away from any soft furnishings or carpet.
Rack mounting
The iDR10 is designed as a 19 inch rack mount unit and will occupy 9U of rack space. Ensure
natural convection of airflow around the unit by allowing good ventilation below, in front of and
behind the unit. Rack equipment known to produce a significant amount of heat should not be
mounted directly below the unit. Forced convection by means of a rack mounted fan-tray may be
desirable in situations where space is restricted and the ambient air temperature is high.
Flight casing
The iDR10 may be ordered with a suitable touring grade flight case. If you have a case made we
recommend that you use only a professional grade specification with shock mounted internal rack
frame. Ensure adequate ventilation in front of and behind the unit when it is powered. Make sure the
wheel locks are engaged when the unit is stationary.
Cables
Make sure the cables are not stretched in any way and are routed to avoid becoming kinked or
damaged. Allow enough service loop for access and removal of the unit. Ensure all connectors are
fully plugged in and locked.
Dimensions and weights
Do not obstruct the ventilation
slots. Ensure adequate air flow
around the iDR10.
Ensure proper grounding. Do
not remove the IEC mains cord earth
(ground) connection.
482 mm / 19" 350 mm / 13.8"
400 mm /
15.75"
9U
AL
LEN&HE
ATH
iD
R-64
MI
X EN
GI
NE
SIDE FRONT
MIXRACK WEIGHT = 26kg / 57lb
730
mm /
28.
75"
669 mm / 26.34" 643 mm / 25.3"
142
mm / 5.6"
HEATH ALLEN
MIXRACK IN FLIGHTCASE = 68kg / 150lb
MIXRACK IN CARTON = 27kg / 60lb