Behringer EUROPOWER Amplifier with ATR EP2000 - Manual (Page 3)

ENGLISH
EUROPOWER EP2000/EP4000 User Manual
3
Introduction 1.
Honestly, who really likes to read manuals? We know you want
to get started right away, but please read this manual carefully
and keep it for future reference. It is only after reading these
instructions that you will fully understand and be able to use all
the features your EUROPOWER amplifier has to offer.
Before you get started 1.1
Shipment 1.1.1
Your EUROPOWER was carefully packed at the factory,
and the packaging is designed to protect the unit from rough
handling. Nevertheless, we recommend that you carefully
examine the packaging and its contents for any signs of
physical damage, which may have occurred during transit.
If the unit is damaged, please do NOT return it to ◊
BEHRINGER, but notify your dealer and the shipping
company immediately. Otherwise, claims for damage or
replacement may not be granted.
Initial operation 1.1.2
Please make sure the unit is provided with sufficient ventilation,
and never place your EUROPOWER amp on top of other heat-
emanating equipment or in the vicinity of a heater to avoid the
risk of overheating.
The mains connection is made via the enclosed power cord and a
standard IEC receptacle. It meets all international safety
certification requirements.
Please make sure that all units have a proper ground ◊
connection. For your own safety, never remove or disable
the ground conductor from the unit or the AC power cord.
The sound quality may diminish within the range of
◊
powerful broadcasting stations and high-frequency sources.
Increase the distance between the transmitter and the
device and use shielded cables for all connections.
Online registration 1.1.3
Please register your new BEHRINGER equipment right after
your purchase by visiting http://www.behringer.com and read
the terms and conditions of our warranty carefully.
Should your BEHRINGER product malfunction, it is our inten-
tion to have it repaired as quickly as possible. To arrange for
warranty service, please contact the BEHRINGER retailer from
whom the equipment was purchased. Should your BEHRINGER
dealer not be located in your vicinity, you may directly contact
one of our subsidiaries. Corresponding contact information is
included in the original equipment packaging (Global Contact
Information/European Contact Information). Should your
country not be listed, please contact the distributor nearest you.
A list of distributors can be found in the support area of our
website (http://www.behringer.com). Registering your purchase
and equipment with us helps us process your repair claims more
quickly and efficiently.
Thank you for your cooperation!