Behringer EUROPOWER Amplifier with ATR EP2000 - Manual (Page 7)

ENGLISH
EUROPOWER EP2000/EP4000 User Manual
7
Examples:
2-channel (stereo) playback •
Two independent mono signals, e.g. instrument signal •
and monitor mix
Bi-amp operation, whereby bass frequencies are run
•
on channel 1, and high frequencies on channel
2 (see chapter 3.2 “Bi-amping”).
Parallel mode is identical to 2-channel mode, except for the
inputs of both channels are internally connected in parallel. One
input signal routes parallel both channels, while their filters etc.
are independently controlled.
Examples:
A mono signal is fed into both channels, whereby amplification •
of each channel is controlled separately.
Parallel mode (as described above) with connection of an
•
additional amp via the remaining free input connector.
The input signal is present there and may be connected to
further equipment.
When connecting a balanced input signal, please make sure
◊
to exclusively use balanced cables for passing the signal
further on. Otherwise, a single unbalanced cable can turn
the entire signal unbalanced.
Fig. 3.1: 2-channel mode
Fig. 3.2: DIP switch positions for 2-channel operation
Fig. 3.3: Parallel operation