Allworx for iOS - Manual (Page 15)

Reach for iOS 1.1 User Guide
Toll Free 1-800-ALLWORX * 585-421-3850 Page 7
wwww.allworx.com
Revised: 6/10/14
3.3 Wipe Current Remote Licenses
The Allworx Server Administrator can send a wipe command to a lost or stolen remote
device, which removes all log in credentials and voicemail information as well as
disables the device from sending/receiving phone calls. The command requires the
Allworx server administrator to change the user password, which restarts the Allworx
Reach Application.
To use the device after receiving a wipe command:
1. Log in to the device using the current credentials and the new password provided by
the Allworx server administrator.
2. Reclaim a new license for the Allworx Reach application. See “Setup” on page 3 for
more information. This restores the voicemail information and enables the application
to send/receive calls.
Table 3: Active Call Icons
Place a phone call. Tap twice to
redial the last number. Conference Call.
Send the current phone call to a
new phone number. Hold.
Place an intercom call. Transfer.
Disconnect the current phone call. Cancel the call transfer.
Display/Hide the numeric keypad. Park.
Mute/Unmute. Dialpad backspace.