Anchor PZ (PARTY) SERIES - PROFILE SIZE: 94MM X 48MM ADDENDUM - HIGH PEAK User Manual
Pz-series high peak appendix
Assemble Arches as noted in the standard PZ manual except as follows for High Peak
Arch: X-Cabling must be installed as shown in Figure 1a.
Figure 1b shows cabling in greater detail, the cross cable required on the High Peak
Arch, the cable guys required on the High Peak Arch and the High Peak attachment.
1
PZ-Series High Peak Appendix
Use this Appendix with the Anchor Structure PZ Manual
EC 4582
PZHP 0912
PZHP 0912
Figure 1a
High Peak Bays
High Peak Arch
High Peak Arch
High Peak Bays
Standard X-Cabling must be installed in bays adjacent to to each set
of High Peak Bays.
Both Bays of the High Peak must have the modified X-Cabling as
shown above. Install as per Standard PZ instructions.
Figure 1b
Upright Cables
Roof Cables
High Peak Bay
Roof Cables
High Peak
Attachment
Cross cable
Cable Guy