Anchor VEHICLE MAINTENANCE SHELTER User Manual
Page 12
Advertising
• Insert a ground bar into the pocket at the bottom of each side of the mid panel.
• Hook J-Bolt through hole in vertical plate on base plate and lower ground bar onto J-Bolt. Secure with washer and wing
nut. Wing Nuts are used to tension and position the fabric. See figures 9c through 9f.
• Re-attach the bottom of the X-Cables and re-tension.
Figure 9c
J-Bolt
Washer &
Wing Nut
Figure 9d
Ground bar
Figure 9f
Ground bar inserted
into mid pocket.
12
Figure 9e
Advertising