ARNOVA 7 - Manual (Page 2)

2
11
3
5
4 2 1
7
6
8
10
9
ENGLISH
DESCRIPTION OF THE DEVICE
Back button: returns to the previous screen
Menu button: gives menu options according to the current screen
On/Off button : enables to turn on or turn off the device.
To put your device in standby (and allow a quick start up), press the Power button once.
Hardware Reset : In the event that your ARNOVA freezes operation, you can
press the “pinhole reset” button .
Microphone
USB Host port: to connect a keyboard, a mouse or a mass storage USB
device. Go on the Home screen, tap on the Menu icon
, then select Settings/USB Mode
select . If the Host port is off, tap on the Host port line to turn it on. Important: turn off the
Host port after use.
Mini-USB port: to connect your ARNOVA to your computer,
using the included USB cable (to transfer files)
Power connector
Headphone jack
Micro-SD card slot
Home button
When touchscreen functioning is impaired, you can recalibrate your touchscreen. If you can access the Android TM interface:
1. In the device homescreen, tap on , then tap on Settings.
2. In the Settings screen, tap on Touchscreen panel calibration and follow the on-screen instructions.
If you can’t access the Android
TM interface, see Hardware Reset
4
.
1
2
3
4
5
6
7
8
9
10
11
UserGuide_Arnova7_PN109899_book.indd 2 13/06/2011 16:41:38