Starting up – ARNOVA 7 User Manual
Page 3
3
1
2
▲
!
EUR
US
UK
ENGLISH
STARTING UP
Installation Wizard
The first time you start up your ARNOVA, the installation wizard will bring you through a few screens to help you set up
the principal settings: Language, country, time, etc.
Before using your ARNOVA for the first time, completely charge the battery!
Charging the Battery
Connect the supplied power cable to the ARNOVA Power connector and to a wall outlet.
The ARNOVA device will turn on and start charging. The Power indicator light is red while the battery is charging. It will turn
yellow when the battery is fully charged.
When touchscreen functioning is impaired,
you can recalibrate your touchscreen. If you can access the Android
TM
interface:
1. In the device homescreen, tap on , then tap on Settings.
2. In the Settings screen, tap on Touchscreen panel calibration and follow the on-screen instructions.
If you can’t access the Android
TM
interface, see Hardware Reset
4
.
UserGuide_Arnova7_PN109899_book.indd 3
13/06/2011 16:41:42