Autoquip FREIGHTLIFT FLT - Manual (Page 56)

56
ROUTINE MAINTENANCE
DANGER !
To avoid personal injury or death, all maintenance procedures described in
this section should only be performed by qualified service personnel.
DANGER !
To avoid personal injury or death, do not operate this equipment with
substandard, defective, or missing parts. Contact a local FREIGHTLITE
service representative if a deficiency is found.
WARNING !
To avoid serious injury or death, GUARDS, INTERLOCKS, and SAFETY
DEVICES must be restored to correct operation when installing parts or
making repairs.
MAINTENANCE SCHEDULE
USAGE SUGGESTED MAINTENANCE INTERVALS
5 – 10 cycles per week 180 days
5 – 10 cycles per day 90 days
5 – 10 cycles per hour 30 days or as required.
** Time required to perform this maintenance is approximately 1 to 2 man-hours, plus
any repairs that may be required.
DYNAMIC INSPECTION (FREIGHTLITE running )
1. Listen for unusual noises. Isolate and check for the cause. Repair if required.
2. Check that the platform carriage is hitting the upper limit stop bolts. Make sure that
the platform carriage is lined up with the upper floor. Adjust the stop bolts, if
required.
3. Check the limit switch and adjust it, if needed.