Barnett Engineering PRO TALK CV2 - Manual (Page 46)

Voice Storage and Configuration with the Telset 6-4
B1272M001 BARNETT ENGINEERING LTD. ProTalk Cv2
6.5 Programming Flowchart

Voice Menu (Basic and Advanced mode)
Cv2: “Enter Voice Code”
You:

Playback or record voices for Site ID and Groups 1 to 6

Playback or record voices for Alarm Inputs 1 to 8 (Basic mode only)

Playback or record voices for Control Outputs 1 to 3 (Basic mode only)

Playback or record voices for enabled Points 1 to 30

Erase All Voices

Exit to Main Menu
Exit to Main Menu
Playback or Record Voices
Cv2: “Site is” “Ajax Compressor Station”
or “Group 1 is” “Electrical” (Advanced mode only)
or “Alarm 1 is” “Power Failure” (Basic mode only)
or “Control 1 is” “Remote Shutdown” (Basic mode only)
or “Point 1 is” “Power Failure”
You:

Record new voice

Exit to Voice Menu
Accept current recording and advance to next voice
Recording:
Cv2: “beep”
You: “Acme Compressor Station”. Recording stops when you stop speaking.
Erase All Voices
Cv2: “Enter Voice Empty Code”
You:

Confirm erase command

Exit to Voice Menu
Exit to Voice Menu

Directory Menu (Basic and Advanced mode)
Cv2: “Enter Directory:
You:

Speak the list of Directory Codes

Select Directory A

Select Directory B

Select Directory C

Select Directory D

Select Directory E

Select Directory F

Exit to Main Menu
Exit to Main Menu