Barnett Engineering PRO TALK CV2 - Manual (Page 48)

Voice Storage and Configuration with the Telset 6-6
B1272M001 BARNETT ENGINEERING LTD. ProTalk Cv2

Turn call progress detector on

Exit to Main Menu
Accept call progress control and advance to Access Code
Access Code
Cv2: “Access Code is empty”
You:

Change access code to 11 (max 8 digits)

Erase access code
Accept access code and advance to Temporary Acknowledge
Timer
Temporary Acknowledge Timer
Cv2: “Acknowledge Timer is code 2”
You:

Turn Temporary Acknowledge Timer off

Change temporary acknowledge timer to 30 minutes

Change temporary acknowledge timer to 60 minutes

Change temporary acknowledge timer to 120 minutes

Change temporary acknowledge timer to 240 minutes

Exit to Main Menu
Accept timer and advance to Modem Code
Modem Code
Cv2: “Modem Code is empty”
You:

Change modem code to 22 (max 8 digits)

Erase modem code
Accept modem code and exit to Main Menu

Alarm Input Menu (Basic mode only)
Directory Assignment
Cv2: “Alarm 1 uses directory A"
You:

Change to directory A

Change to directory B

Disable input

Exit to Main Menu
Accept directory assignment, advance to next alarm or Alarm
Format
Alarm Format
Cv2: “Alarm Format is 0”
You:

Change format to normally low inputs

Change format to normally high inputs

Change format to normally low latched inputs

Change format to normally high latched inputs