Bear Archery Compound Bow 2013 - Manual (Page 27)

27
CAM ADJUSTMENTS
Adjusting Draw Length – Perimeter
Weighted Modular Single Cam
Bow model:
• Home Wrecker
The perimeter weighted single cam has a
modular draw length adjustment. Most
draw length adjustments can be made
without the use of a bow press. Draw
length changes are made by simply
changing modules and moving the draw
stop. Accessory modules are available
from your local Bear Archery dealer in
one-inch draw length increments. Each
module is numbered, with #10 being the
longest draw length and #4 being the
shortest. To change modules remove the
socket head cap screws from the present
module, remove that module and replace
with a new module. Such module draw
length adjustments will not affect peak
draw weight. Modules are right and
left hand specific. USE ONLY RH
MODULES ON RIGHT HAND CAMS
AND LH MODULES ON LH CAMS!
When a module is changed, the draw
stop must also be moved to the
corresponding setting marked on the
cam. Draw stop must be positioned so
that the side marked “OUT” faces out.