Bear Archery Compound Bow 2013 - Manual (Page 28)

28
CAM ADJUSTMENTS
Additionally, fine draw length
adjustments of ½ inch can be made by
removing the bowstring from the
standard “dot” string post and
reattaching it to either the “+” or “-“
string posts on the cam. Moving the
string to the “+” post will increase draw
length by ½” and moving the string to
the “-“ post will decrease draw length by
½”. To make such adjustments, it is first
necessary to remove tension from the
harness system of the bow by
compressing the bow in a bow press. A
fixed or portable bow press must be
used! Under NO circumstances can
this relaxing of the harness system be
accomplished by simply backing out
limb bolts. Refer to the images on the
next page for additional reference
.
Home Wrecker Draw Lengths
String on "Dot" Post String on "+" Post String on "-" Post
Draw Length Draw Length Draw Length
4 22 22.5 21.5
5 23 23.5 22.5
6 24 24.5 23.5
7 25 25.5 24.5
8 26 26.5 25.5
9 27 27.5 26.5
10 28 28.5 27.5
Modular Single Cam Draw Length Chart
Module Number