Bear Archery Compound Bow 2010 - Manual (Page 4)

4
! IMPORTANT PRESS !
! INFORMATION !
Due to the innovative and advanced design of
your Bear Archery bow limbs, it is of the utmost
importance that your bow ONLY BE
PRESSED IN PROPER BOW PRESSES.
Traditional style presses that use rollers to apply
pressure only to the mid section of the limbs
CANNOT BE USED. Only presses that are
capable of applying pressure to the last 2” of the
limbs should be utilized, as illustrated below
!NOTE! – Limb bolts MUST be backed out 4
complete turns prior to pressing a bow equipped
with flare quad limbs and 3 complete turns for
bows equipped with max pre-load quad limbs.
DO NOT USE THIS STYLE PRESS ARMS
APPROVED BOW PRESSES:
For the most up to date and accurate list, please
visit your local Bear Archery dealer or
www.BearArcheryProducts.com
Failure to adhere to this list of
presses can result in immediate failure of the
limbs, possible injury and void the
manufacturer’s warranty.