Bedrug BED LINERS: BedRug - Manual

BedRug Bedliner Installation Instructions
Preparation
BRINST Rev. Level: 15 12/4/2009 Page 1 of 6
Part Number(s): Multiple
WARNING: IMPROPER INSTALLATION
WILL RESULT IN LINER FLYING OUT OF
THE TRUCK. FOLLOW INSTRUCTIONS
EXACTLY.
IMPORTANT: Never cut or put slits through
any seams or sewn areas of the BedRug, unless
specifically detailed in these instructions. This
will cause the seam to come completely apart.
Kit Contents
Item # Quantity Req’d. Description
1 1 BedRug floor/tailgate assy
2 1 BedRug bulkhead/sidewall assy
3 1 Hardware kit
Additional Items Required For Installation
Item # Quantity Req’d. Description
Recommended Tools
Personal & Vehicle
Protection Notes
Safety Glasses
Gloves
Special Tools Notes
Tool required to remove tie
downs (unique to vehicle)
Installation Tools Notes
Utility Knife Use to cut slits or trim
BedRug for cargo mgmt.
systems
Awl Use to locate tie down
fasteners. Holes to be placed
in BedRug
Special Chemicals Notes
Approved cleaner Rubbing Alcohol
General Applicability
Multiple
Legend
STOP: Damage to the vehicle may occur. Do not
proceed until process has been complied with.
OPERATOR SAFETY: Use caution to avoid risk of
injury.
CAUTION: A process that must be carefully observed
in order to reduce the risk of damage to the
accessory/vehicle and to ensure a quality installation.
TOOLS & EQUIPMENT: Calls out the specific tools
and equipment recommended for this process.