BKI SM75 Sandwich Merchandiser - Manual (Page 8)

Sandwich Merchandiser Installation
6
Installation
Serious injury, equipment damage or death could result if attempting to install this unit
yourself. Ensure that an authorized BKI service agent installs the unit.
Instructions For Shipping Damage
You are responsible for filing all freight claims with the delivering truck line. Inspect all cartons and crates for
damage when they arrive. If there is damage noted to shipping crates or cartons, or, if a shortage is found, note
this on the bill of lading (all copies) before signing.
If damage is detected when the equipment is uncrated, immediately call the delivering truck line and follow up the
call with a written report indicating concealed damage to your equipment. Ask for an immediate inspection of your
concealed damage item. Crating material MUST be retained to show the inspector from the truck line.
Electrical Information
Electrocution, equipment failure or property damage could result if an unlicensed
electrician performs the electrical installation. Ensure that a licensed electrician perform
the electrical installation in accordance with local codes, or in the absence of local codes,
with the National Electrical Code, ANSI NFPA 70-20XX.
This unit, when installed by an authorized BKI service agent, must be wired for use in accordance with all
applicable local, state, and federal codes. For specific electrical requirements and connections refer to the wiring
diagram attached to the unit or provided in the Service Manual.
Important Installation Instructions
LEVELING THE UNIT: Your SM should be level for best operating results. The unit may
be leveled by placing shims under the base. The shims must be made of metal or other
non-combustible material. If you have any questions, please contact your BKI
Distributor. If they are unable to answer your questions, contact the BKI Technical
Service Department, toll free: 1-800-927-6887. Outside the U.S., call 1-864-963-3471.
COUNTERTOP INSTALLATIONS: To conform to NSF Standard 4, countertop models
are designed to be sealed to the supporting surface using an NSF approved Silicone
sealant. BKI recommends Dow Corning RTV # 732 Multi-purpose Sealant. If you have
any questions, please contact your BKI Distributor. If they are unable to answer your
questions, contact the BKI Technical Service Department, toll free: 1-800-927-6887.
Outside the U.S., call 1-864-963-3471.
This unit is designed for pre-packaged foods only. If you have any questions, please
contact your BKI Distributor. If they are unable to answer your questions, contact the BKI
Technical Service Department, toll free: 1-800-927-6887. Outside the U.S., call 1-864-
963-3471.