BLACKHAWK! SPECOPS NRS SHOTGUN STOCK - Manual (Page 7)

Page 6
www.BLACKHAWK.com
BLACKHAWK! ® NORFOLK, VA U.S.A. 1.800.694.5263
Sling Mounting Tips
1. Slit for 1.5” multi-point tactical sling.
2. Sling stud for installation of sling swivel and sling.
3. Location for various sling plate adapters
(Must be purchased from an aftermarket supplier, call BLACKHAWK! Cus-
tomer Service for recommended products).
4. Optional left or right hand sling stud locations
3
2
1
4
If a replacement forend came with your SpecOps Stock, refer to the installation
directions below. Refer to manufacturer’s instructions that came with your gun for the
best method to remove your forend. Shotguns generally have some type of retaining
nut that must be removed to free the barrel and another to free the forend. (Fig. 7)
1. Remove the barrel retention nut.
2. Remove barrel from action.
3. Remove forend nut by turning with
appropriate tool.
4. Forend will now slide freely off and
detach from slide handle.
5. Slide new forend back onto slide handle.
Reassemble in reverse order tightening
the nuts according to the manufacturer’s
recommendations.
Fig. 7