BLITZ FATT Advance Plus - Manual (Page 3)

SETTING MANUAL
※ Please read the operation manual list together.
−
３
−
①Display Change: Display can change by pressing the UP button in order of VOLTAGE⇒ＢOOST⇒TIMER
BATT V
TIMER M1
hkPa BST
TIMER A-H
(1) VOLTAGE (2) BOOST (3) TURBO TIMER
②TIMER MODE CHANGE: TIMER MODE can be selected in AH/AS/AL/M1/M2
TIMER M1
Hold P button at Timer Display Push Up or Down button to
change the mode.
(SET logo flashes）
TIMER M1
Hold P Button at the Timer display
mode （M1/M2）
SET
TIMER A-H
Hold P button to complete the setting
（SET logo turns off）
TIMER A-H
③Countdown time setting（Manual Mode）：Countdown time can be set manually (M1/M2) no matter how long you drive the vehicle.
TIMER
Press P button.
（SET logo Flashes）
Press P button
（SET logo flashs）
SET
TIMER
Press Up or Down button to
set the idle time
（SET/M1 logo flashes）
SET
M1 M1 TIMER
Press P button.
（SET logo flashes）
SET
M1 TIMER M1
Hold P button to complete the setting.
(SET logo turns off）
④Count down time setting（Auto mode）：Countdown time can be set up as Aut o mode(AH/AS/AL) in Maximum and Minimum time.
This mode estimates the idle time based on the driving time and 3 levels can be chosen as （AutoHigh) > AS(AutoStandard) > AL(AutoLow)
Hold P button at the Timer display
mode（AH/AS/AL） Press P button.
（SET logo flashes)
SET
TIMER A-H
Press Up or Down button to
set up the Maximum time.
（SET/AH logo flash）
SET
TIMER A-H
Press P button.
（SET/AH/MIN logos flash）
SET
TIMER A-H
MIN
SET
TIMER A-H
MIN
Press Up or Down button to
set the Minimum time.
（SET/AH/MIN logos flash）
SET
TIMER A-H TIMER A-H
Hold P button to complete
the setting （SET logo turns off）
OPERATION MANUAL LIST
OPERATION PROCEDURE
Setup begins from 1 2 3 4 5 6 7
Power ON - P hold
Power OFF - Up+Down Hold
Force Quit During the count down P Hold
Display setting - Up or Down
Timer mode set Timer Display Mode P Hold Up or Down P Hold
Idle time setting Timer Display(M1/M2) P Hold P Up or Down P P Hold
Timer Display(AH/AS/AL) P Hold P Up or Down(Max) P Up or Down(Min) P P Hold
Idle time change During the count down Up or Down
Engine type Display Timer Display Mode P P
Engine type change Timer Display Mode P+Up or Down Hold P
Back light setting Voltage Display Mode P+Up Hold Up or Down P Hold
Buzzer volume Voltage Display Mode P+Down Hold Up or Down P Hold
Volt warning setting Voltage Display Mode P Hold Up or Down P Hold
Boost peak setting Voltage Display Mode P P
Reset Boost peak Boost Peak Display P Hold
Boost warning setting Boost Display Mode P Hold Up or Down P Hold
Boost Unit setting Boost Display Mode P+Up Hold P+Down Hold
SETTING MENU