CalDigit RAIDShield - Manual (Page 32)

31
31
Controller Update
User can update the System Code / Boot Code / BIOS / EFI through RAIDShield.
1. To perform the updates for the product, please select the product from the list. Click on the Controller > Update,
and then choose the firmware that you wish to update.
2. Locate the update file through the browser, and perform the update. Please make sure to select the correct
device.
**For BIOS/EFI: If you are booting up the operation system from the CalDigit products (such as: CalDigit RAID
Card), you will need to update the BIOS for PC, or the EFI for MAC. By updating one of them, the other one will
be erased.
Attention:
Always perform the update in the order of System Code > Boot Code > BIOS/EFI, failure to update in such order
may result problematic on the connection between the computer and the CalDigit product.
Attention:
Don’t forget to visit our website. Always check for the newest products, update files, FAQ, instructions on
www.caldigit.com .