CalDigit S2VR HD Manual - Manual (Page 12)

11
Configure RAID Level
Note: Your S2VR HD is configured by CalDigit initially in JBOD mode.
You can modify your RAID LEVEL by reconfiguring your RAID.
Data on your S2VR will be lost as this process will format the drives.
Backing up your data on another S2VR HD is highly recommended.
You must restart your computer after every RAID setting change.
We do not recommend frequently changing your settings.
Basic RAID Configuration
1. When configuration the RAID Setting there is both basic and advanced
modes that can be set. Select S2VR (Box with Serial #).
2. Click on Configure RAID
3. Select RAID setting, click “Create New RAID”.