CalDigit FASTA-2e 2 Port PCI-Express SATA 3G Card - Manual (Page 4)

3
Installation Preparation
Please make sure you have the correct cable to connect your external SATA device to the card. You will need to
use an eSATA cable to connect to our PCI-Express host card.
Hardware Installation
1. Turn off your computer and unplug the power cord.
2. Remove the cover of your computer and locate an available PCI-Express slot on your motherboard.
3. Install the card into the open PCI-Express slot on the motherboard and make sure the card is firmly plugged
into the slot.
4. Replace the cover of your computer.