Carlin EZ-1/2/3 - Manual (Page 2)

Carlin part number MNEZ123 Rev. 07/13/11
– 2 –
Model EZ-1/2/3 oil burners — Instruction manual
– 2 –
PLEASE read this first . . .
Special attention flags
Please pay particular attention to the following when you see them through-
out this manual.
Notifies you of hazards that WILL cause severe personal injury,
death or substantial property damage.
Notifies you of hazards that CAN cause severe personal injury,
death or substantial property damage.
Notifies you of hazards that WILL or CAN cause minor personal
injury or property damage.
Notifies you of special instructions on installation, operation or
maintenance that are important, but are not normally related
to injury or property damage hazards.
General information
Burner applications
Follow all instructions in this manual, the primary control data sheet and
the appliance manual. Verify the burner is correct for the appliance being
used and for all applicable codes/standards.
Damage or shortage claims
The consignee of the shipment must file damage or shortage claims im-
mediately against the transportation company.
When calling or writing about the burner . . .
Please provide us with the UL serial number and burner model number
to assist us in locating information. This information can be helpful when
troubleshooting or obtaining replacement parts.
Follow the guidelines below to avoid potential severe
personal injury, death or substantial property dam-
age.
Installer/service technician . . .
• Read all instructions before proceeding. Perform all procedures,
and in the order given to avoid potential of severe personal injury,
death or substantial property damage.
• Before leaving the site after startup or service, review the User’s
information page with the user. Make the user aware of all po-
tential hazards and perform the training outlined below.
Train the user . . .
• To properly operate the burner/appliance per this manual and the
appliance instructions see User’s information.
• To keep this manual at or near the burner/appliance for ready
access by the user and service technician.
• To contact the service technician or oil dealer if he encounters
problems with the burner/appliance.
• To keep the appliance space free of flammable liquids or vapors
and other combustible materials.
• Do not use laundry products, paints, varnishes or other chemicals
in the room occupied by the burner/appliance.
• To contact the service technician at least annually for startup and
burner/appliance service.
When servicing the burner . . .
• Disconnect the electrical supply to the burner before attempting
to service to avoid electrical shock or possible injury from moving
parts.
• Burner and appliance components can be extremely hot. Allow
all parts to cool before attempting to handle or service to avoid
potential of severe burns.
Burner options . . .
Optional Burner Cover with air intake adapter
• Carlin’s optional EZ-burner cover is available on all EZ-1/2/3
models.
• Combustion air can be taken from the room or can be piped to
the burner cover when the optional air intake adpater is installed.
(Requires Field CAS-1 combustion air system.)
• See separate instructions provided with the cover for installation
and special instructions required with the cover.
Optional P/N 97406 Air Intake System (EZ-1 only)
• Carlin’s 97406 Air Intake System may be supplied with model
EZ-1 burners only. (Also requires Field CAS-1 combustion air
system.)
• The air intake adapter is bolted to the burner housing. The adapter
includes air shutter and indicator.
• See separate instructions provided with the cover for installation
and special instructions required with the cover.
Should overheating occur:
(1) Shut off the oil supply to the burner.
(2) DO NOT shut off the control switch to
the circulator or blower.