Carter-Hoffmann HL10-36 - Manual (Page 8)

Water probe sensitivity adjustment procedures (cont.)
6. Add more water to the pan until the shortest probe is in the water.
Follow the same procedure as in step number four until the line
farthest to the right on the temperature display moves from the bot-
tom to the top of the display (see illustration). This probe is now
sensing water.
7. When all three lines are at the top of the temperature display, turn
off power to the unit. The water probes are now adjusted to sense
your quality of water.
8. Turn the power back on to the unit for normal operation.
hot LOGIX
Inner surfaces of the unit
will be very hot during and
after operation.
CAUTION:
HOT SURFACE
This unit produces steam,
use caution when cleaning
or opening the doors.
CAUTION:
STEAM HAZARD
8