Pc camera driver installation, Pc camera audio setup, Ll procedure in – chiliGREEN M400A User Manual
Page 110: Pc camera driver in
Modules
7 - 8 PC Camera
7
PC Camera Driver Installation
1.
Insert the PC Camera CD-ROM into the drive.
2. Click Next.
3. Click Finish to restart the computer.
4. After restart the computer will find the new hardware for you.
5. Run the AMCAP program from the CMM PC Camera item in the
Start > Programs/All Programs menu.
PC Camera Audio Setup
If you wish to capture video & audio with your camera, it is necessary to setup
the audio recording options in Windows.
1.
Go to the Start menu and point to Settings (or just click Control Panel) and
click Control Panel, then double-click the Sounds & Audio Devices icon
(Speech, and Audio Devices in Category View).
2.
Click Advanced in the Device volume tab.
3.
Click Options (Volume Control) and scroll down and click Properties.
4.
Click Recording (Adjust volume for) and click Microphone (check box),
then click OK.
5.
Make sure the Select (check box) in the Recording Control panel, under
the Microphone section, is checked (boost the volume as high as it will go).
6.
Close the window, then click OK.