chiliGREEN 12 TN120R - Manual (Page 169)

Intel Video Driver Controls
Attaching Other Displays B - 5
B
Attaching Other Displays
Besides the built-in LCD, you can also use an external monitor/flat panel display,
connected to the external monitor port at the rear of the computer, as your display
device. The following are the display options:
1. The built-in LCD OR an external monitor/flat panel display connected to the exter-
nal monitor port (Single Display).
2. The built-in LCD AND an external monitor/flat panel display connected to the
external monitor port (Multiple Display).
Configuring from Windows Vista
1. Attach your external display to the external monitor port, and turn it on.
2. If a New Display Detected window does not appear in Windows Vista, go to the
Windows Mobility Center control panel (Mobile PC > Adjust commonly used
mobility settings) and click Connect display.
3. Click on any of the buttons to configure the displays to your preference, or click
Display Settings to access the control panel.

Function Key
Combination
You can use the Fn + F7
key combination to tog-
gle through the display
options:
• Notebook Only
• External Display Only
• Notebook + External
Display
Make sure you give the
displays enough time to
refresh.
Figure B - 4
Windows Mobility
Center