Bakers Pride VG8/C - Manual (Page 13)

13
NOTICE:
THE COMBINATION OF FACTS, DATA, DESIGN ELEMENTS, ENGINEERING DATA, MANUFACTURING DATA & ASSEMBLY DATA
WHICH MAY BE CONTAINED IN THIS DOCUMENT ARE OF A PROPRIETARY NATURE TO BKI.
THESE MATERIALS ARE NOT TO BE USED OR COPIED WITHOUT PRIOR WRITTEN PERMISSION FROM BKI.
ALL RIGHTS ARE RESERVED.
Operating Overview.
Switch main power “ON”
Select Cook program
Press Pre-heat button
Buzzer sounds when oven is up to temperature (Ready)
Press Cancel Alarm button (oven temperature is maintained)
Press Stop button – short press (oven heaters & fans off) oven in pause
Load product.
Press Cook button
Alarm sounds (End of Cook)
Cancel alarm (alarm button)
Check product temperature (Internal temperature must be 85
o
C minimum)
Xtra time required?
If yes press Xtra button (Each press adds an xtra 5 mins) xtra time is displayed
Alarm sounds.
Cancel Alarm (alarm button)
Check product internal temperature
If OK, press Stop button & unload
If NOT, add Xtra time
Note:
A quick press of the Stop button puts the oven in pause mode; the function light (cook, hold) will
flash, Press the flashing function button again to restart.
Press & hold stop button until function lights go out to stop oven completely.
If Hold required?
Press Hold button.
At end of hold period the Alarm sounds, Cancel Alarm, Remove product.